Menu
Call (267) 697-3471
Chimney Parts

Chimney Damper Repair Morrisville, PA

Damper problems in Morrisville fireplaces, from a broken handle to a rusted plate, can usually be fixed or replaced by freeing the plate, fixing the linkage or installing a new damper. Call (267) 697-3471 to reach a local chimney sweep.

A chimney damper opens to let smoke out and closes to keep heated air from escaping up the chimney. The most common type is a throat damper, a cast iron or steel plate that sits right above the firebox and opens with a handle or chain. Because it sits in heat, soot and moisture, it wears out over time.

A stuck shut damper means smoke and gases spill into the room instead of rising up the flue. With a fire already burning and the damper stuck closed, ventilate the room, keep everyone clear and call 911 if smoke gets heavy or someone feels ill. A damper should stay open until the ashes are cold.

An open or leaky damper lets heated air escape and cold air come down the chimney. Throat dampers also tend to seal poorly over time as the plate warps or rusts. That is why many homeowners replace a failed throat damper with a top sealing damper.

Chimney Damper Repair is often paired with chimney cap installation and fireplace repair, depending on the cause.

Looking for Morrisville chimney damper repair? Call (267) 697-3471 to reach a nearby chimney sweep.

Call now
The process

How chimney damper repair works

Dampers fail for a few different reasons, so the fix depends on what is wrong.

  1. Inspect the damper

    The damper is opened and closed to see where it sticks or fails to seal. Rust and buildup are checked too.

  2. Remove buildup

    The damper frame and plate are cleaned so they can move freely. This alone fixes some stuck dampers.

  3. Repair the parts

    Broken handles, pins, springs or chains are repaired or replaced. A warped plate may not be fixable.

  4. Install a new damper

    When repair is not practical, a new damper goes in. You will hear which choice makes sense for your fireplace.

  5. Test the operation

    The sweep tests the damper and checks the draft. Ask how to work it if it is a new style.

What is included

What chimney damper repair covers

Linkage repair

The connection between the control and the plate is repaired so the damper responds again.

Gas log damper clamps

Vented gas log fireplaces need a damper stop to prevent carbon monoxide from building up.

Cast iron damper repair

Throat dampers that stick or leak are repaired with worn parts replaced.

New dampers

Failed dampers are replaced with a new throat damper or a top sealing damper matched to the flue.

Top sealing dampers

A damper mounted at the top of the chimney seals the flue with a gasket which keeps rain and animals out too.

Related service

Chimney Damper Replacement Morrisville, PA

When a damper is rusted through, cracked or badly warped, replacement is usually the only option. Throat dampers can be replaced with a new throat damper, but access is limited and fit can be tricky. For many fireplaces, a top sealing damper is the easier and tighter fit.

Calling (267) 697-3471 from Morrisville with a quick description of the problem helps the sweep plan. If the fireplace has gas logs, say so, since the damper must stay open with vented logs. You will hear which replacement suits the fireplace.

Related service

Top Sealing Damper Morrisville, PA

Top sealing dampers sit on the top of the flue and close with a tight rubber or silicone gasket. You work it with a handle in the firebox attached to a cable running up the chimney. Many include a built in cap and mesh.

Sealing the top stops cold air from filling the chimney, which keeps the fireplace area warmer. It also keeps rain from running down the flue. Check that it is fully open before every fire.

Local help

Chimney Damper Repair Near Me

Dampers in Morrisville fireplaces take the brunt of heat in winter and moisture the rest of the year. In Morrisville and places nearby like Yardley, Fairless Hills, Levittown and Woodbourne, a damper left open in summer can let humid air and odors into the house, and a top sealing damper is a popular upgrade for older fireplaces.

For chimney damper repair in Morrisville, PA or nearby towns like Yardley, Fairless Hills, Levittown and Woodbourne, call (267) 697-3471 to reach a chimney sweep who covers your street.

Chimneys in this climate

Winters here are long and cold, and the heating season usually runs from October well into April. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, and each winter widens the cracks a little more. Wind driven rain from coastal storms finds any gap in flashing, too. Most homeowners in Morrisville, PA schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why act early

Smaller repairs

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Familiar with local homes

Chimney sweeps in Morrisville know the chimneys and fireplaces common in local homes.

Know what happens next

Ask your questions before you agree to anything.

Chimney Damper Repair questions

How does a top sealing damper work?
A top sealing damper is mounted at the top of the chimney and closes the flue with a gasket. A cable connects it to a handle inside the fireplace. Many include a cap and screen.
Why is my chimney damper stuck?
Stuck dampers usually come from rust, heavy soot or a warped plate. Worn linkage or a bent frame can cause it too. Cleaning or repair often frees it.
Can I use my fireplace if the damper is broken?
If the damper is stuck closed, lighting a fire will push smoke and carbon monoxide into the house. One that is stuck open is mostly an energy and comfort problem. Get it repaired before the next fire.
How long should I wait to close the damper after a fire?
Leave the damper open until the ashes are cold, which can take many hours. Embers still give off carbon monoxide, so closing early is risky. When not in use, a closed damper keeps drafts out.
Should the damper be open with gas logs?
Gas logs that are vented require an open damper, typically secured with a clamp. Never close the damper while gas logs are burning. Keep CO alarms in the home and follow the manufacturer instructions for the logs.

More questions? Call (267) 697-3471

Related services

  • Chimney Cap Installation

    Installing chimney caps with mesh sides so water, birds and debris stay out of the flue.

    Learn more
  • Fireplace Repair

    Restoring masonry and factory-built fireplaces from the hearth and firebox to the damper and doors.

    Learn more
  • Smoke Chamber Repair

    Parging stepped brick, filling open joints and rebuilding the smoke shelf before heat can escape toward nearby framing.

    Learn more
  • Chimney Animal Removal

    Clearing animals and nesting material out of chimneys and flues, then capping the top so they cannot return.

    Learn more

Looking for something else?

See all chimney services

Talk to a Morrisville chimney sweep about chimney damper repair

Call now for Morrisville chimney damper repair and help in the towns around it.

(267) 697-3471

Free to call. No forms to fill out.

Call (267) 697-3471